Sheep Stunning Box for Goat & Sheep Slaughterhouse | HT-S101-I
Sheep Stunning Box for Goat & Sheep Slaughterhouse. Compare animal range, handling method and transfer interfaces; share your requirements for configuration review.

Specification notes
| Model | HT-S101-I |
|---|---|
| Maximum Capacity | Up to 150 heads/hour |
| Overall Dimension | 2000 × 600/800 × 1600 mm |
| Material Option | Hot Galvanized Steel / Stainless Steel |
| Data status | Source reference R1; configuration requires written confirmation |
Use and process role
Sheep Stunning Box for Modern Sheep & Goat Slaughterhouses
The Sheep Stunning Box is a professional restraining and stunning device designed for sheep and goat slaughter processing lines.
It is mainly installed between the live animal holding area and the slaughter/bleeding section, providing a controlled environment for safely fixing animals before stunning or slaughter operations.
The equipment uses a compact enclosed structure to limit animal movement while allowing operators to perform stunning procedures efficiently.
Compared with traditional manual restraint methods, the sheep stunning box improves processing safety, reduces animal stress and creates a more stable working environment for slaughterhouse operators.
The machine is suitable for:
Sheep slaughterhouses
Goat abattoirs
Halal meat processing plants
Livestock processing facilities
The stunning box can be integrated with:
Sheep restraint conveyors
Bleeding conveyors
Overhead carcass rail systems
Complete sheep slaughter lines
Structure and working principle
The live sheep or goat enters the stunning box through the entrance door.
After the animal is positioned inside:
The rear gate closes to prevent backward movement.
The animal body is gently restrained inside the box.
The operator performs stunning or slaughter preparation.
After completion, the front gate opens.
The animal moves to the bleeding section for further processing.
The pneumatic control system provides stable operation and allows quick opening and closing of the restraint mechanism.
The controlled restraint process helps reduce unnecessary animal movement and improves slaughter efficiency.
Source-listed construction and features
1. Safe Animal Restraining Structure
The enclosed box design provides effective animal positioning.
Applications and integration
Sheep & Goat Slaughterhouse Application
The Sheep Stunning Box is widely used in:
1. Sheep Slaughter Processing Plants
For controlled restraint before slaughter and bleeding.
2. Goat Meat Processing Facilities
Suitable for goat slaughter operations requiring stable animal handling.
3. Halal Meat Production Plants
Used as part of halal slaughter systems.
4. Livestock Abattoirs
Installed in complete sheep/goat slaughter lines.
Typical processing flow:
Live Sheep Holding Area
↓
Sheep Stunning Box
Bleeding Conveyor
Skinning System
Evisceration
Carcass Chilling
Selection conditions and project fit
Provide species, full live-weight and size range, required rate, animal handling procedure, operator position, entry/exit interfaces and destination requirements. Safety arrangements and the applicable procedure require project-specific engineering confirmation.
Evidence, configuration and document status
The descriptions and tables below are source-listed reference information, not independently measured results. Confirm material grade, electrical supply, dimensions, duty, guards, controls and delivery scope in the approved quotation and drawing. No model-specific certificate or verified customer installation is established by this page. Request the document issuer, applicable model, scope and revision before relying on a compliance claim.
Source and version
Reference compilation R1, 2026-11-16. Supplied document: 1. 羊致昏 屠宰 放血设备.doc; section 1.2. Configuration rows retain source units. Where the source lists alternatives or several models, each row must be checked as a separate configuration; a capacity or dimension must not be transferred between models.
Installation and process interfaces
Provide the full animal weight/size range, approach and exit route, operator position and the interface to the receiving rail or conveyor. Allow access for the proposed guarding and maintenance arrangement.
Utilities, control and feedback requirements
Confirm the proposed electrical, pneumatic or hydraulic arrangement from the matching model table. Agree control positions, emergency stopping and interlocks with the responsible engineering team; do not assume a universal slaughter procedure or approval.
Maintenance and part identification
Request the configuration-specific manual and part references for restraint components, drive parts, hoses and controls where fitted. Agree quantities and replenishment needs against actual duty and delivery experience. This page does not prescribe maintenance intervals, repairs or a guaranteed stock position.
Configuration-specific document checklist
Before purchase, identify the complete model and suffix, configuration table and drawing revision. Request the applicable layout/interface drawing, specification, manual, parts list and agreed inspection or test records. Performance curves or certificates should be linked only when an applicable original exists; a reference summary is not a substitute.
Compare configurations for your project
For Sheep Stunning Box for Goat & Sheep Slaughterhouse | HT-S101-I, keep the complete identifier HT-S101-I attached to its own source configuration. Compare process duty, incoming animal or product range, target output, utilities, installation envelope and upstream/downstream interfaces under the same project conditions. A higher catalogue rate alone does not establish a better fit.
Start with this page's listed reference fields: Maximum Capacity: Up to 150 heads/hour; Overall Dimension: 2000 × 600/800 × 1600 mm; Material Option: Hot Galvanized Steel / Stainless Steel. Confirm units, conditions and revision against the quoted configuration; do not transfer values to another model.
Compare alternative quotations only after each supplier identifies the complete model, configuration and matching documents. No universal suffix meaning or unsupported advantage over another model is asserted.
Purchasing review and enquiry preparation
Start with Sheep Stunning Box for Goat & Sheep Slaughterhouse | HT-S101-I and its specification/source notes. Download the linked reference summary, then request the original configuration-specific drawing and current technical documents. The summary is not an approved drawing, certificate or acceptance record.
Use the linked sheep & goat processing application and purchasing guidance to review process interfaces, selection conditions and the proposed supply boundary. Verify which manufacturer, supplier and installation responsibilities are included; a reference photo does not establish factory ownership, certification or a completed HUATAO installation.
Before enquiry, prepare animal species or incoming product, size/weight range, target throughput, operating shifts, destination, available utilities and a layout or interface drawing. Quote HT-S101-I and identify the missing documents or conditions you need checked. Use the enquiry on this page so the product and original source page are retained.
| Item | Specification |
|---|---|
| Product Name | Sheep Stunning Box |
| Application | Sheep & Goat Slaughterhouse |
| Model | HT-S101-I |
| Operation Type | Pneumatic Control |
| Working Pressure | 0.6–0.8 MPa |
| Air Consumption | Approx. 190 L/time |
| Maximum Capacity | Up to 150 heads/hour |
| Overall Dimension | 2000 × 600/800 × 1600 mm |
| Material Option | Hot Galvanized Steel / Stainless Steel |
| Suitable Animals | Sheep, Goat, Lamb |
| Control Method | Pneumatic Valve Control |
Buyer FAQ
What is a sheep stunning box used for?
sheep stunning box is used to safely restrain live sheep or goats before stunning or slaughter, improving operator safety and processing efficiency.
What animals can use this stunning box?
The equipment is mainly designed for sheep, goats and lambs.
What is the capacity of the sheep stunning box?
The standard model can process approximately up to 150 heads per hour depending on operation conditions and slaughter line configuration.
What information is needed to select this equipment?
Provide species, full live-weight and size range, required rate, animal handling procedure, operator position, entry/exit interfaces and destination requirements. Safety arrangements and the applicable procedure require project-specific engineering confirmation.
Are these specifications an approved supply commitment?
No. These are source reference details. The quotation must identify the exact configuration, drawing revision, included documents and agreed acceptance criteria.
Related configurations and guidance
Reference specification and document status
Download HT-S101-I reference specification and verification checklist
This reference is not an approved manufacturing drawing, inspection report or certificate. Request the configuration-specific documents before purchase.