SlaughterPro | HUATAOSearch

Sheep Carcass Band Splitting Saw | HT-S220-I

Sheep Carcass Band Splitting Saw. Compare input range, required output and working interfaces; share your requirements for configuration review.

Sheep Carcass Band Splitting Saw | HT-S220-I — supplied product-directory equipment/process illustration; exact model configuration must be confirmed

Supplied product-directory reference image: equipment family or process context. It is not proof of an exact model, HUATAO installation or certification. Confirm the proposed configuration photograph and drawing before ordering.

Specification notes

ModelHT-S220-I
Rated Voltage380V
Motor Power2.2 kW
Maximum Capacity80 heads/hour
Machine Size1100 × 260 × 450 mm
Suitable MaterialSheep & Goat Carcass
Data statusSource reference R1; configuration requires written confirmation

Use and process role

Sheep Carcass Band Splitting Saw for Sheep & Goat Slaughterhouses

The Sheep Carcass Band Splitting Saw is a professional cutting machine designed for splitting sheep and goat carcasses into two equal halves after evisceration and inspection.

During the slaughter process, complete carcasses need to be divided along the backbone before entering chilling, cutting or deboning procedures. This equipment provides a fast, accurate and hygienic splitting solution for modern sheep processing plants.

Compared with traditional manual cutting methods, the carcass band splitting saw offers:

Higher cutting efficiency

More accurate carcass separation

Reduced labor intensity

Better meat processing consistency

The machine is suitable for:

Sheep slaughterhouses

Goat abattoirs

Halal meat processing plants

Lamb processing factories

It can be integrated with:

Overhead carcass conveyor systems

Carcass inspection platforms

Chilling systems

Deboning and packaging lines

The referenced HT model is mainly used for cutting sheep carcasses into half parts and provides a capacity of approximately 80 heads/hour.

Structure and working principle

The sheep carcass is suspended on an overhead rail system or positioned at the cutting station.

When the splitting operation starts:

The operator guides the band saw along the center line of the carcass.

The moving saw blade cuts through the backbone and ribs.

The complete carcass is divided into two symmetrical halves.

The separated carcasses continue to the next processing stage.

The electric reciprocating saw movement provides stable cutting performance while maintaining a clean cutting surface.

Source-listed construction and features

1. Fast Carcass Splitting

The high-speed saw blade enables rapid carcass separation.

Benefits:

Short cutting time

Increased production efficiency

Suitable for continuous slaughter lines

2. Accurate Cutting Performance

The saw maintains a stable cutting path to ensure:

Even carcass division

Reduced meat loss

Better product appearance

3. Compact Handheld Design

The machine features a compact structure, making it easy for operators to control during splitting operations.

Applications and integration

Sheep & Goat Slaughterhouse Application

The Sheep Carcass Band Splitting Saw is mainly installed in the carcass processing section after:

Bleeding

Skin removal

Evisceration

Veterinary inspection

Typical production flow:

Sheep Slaughter

↓

Skinning

Carcass Inspection

Carcass Band Splitting Saw

Chilling

Cutting & Deboning

Suitable Industries

1. Sheep Abattoirs

For standard carcass splitting operations.

2. Goat Meat Processing Plants

Used for goat carcass half-cutting.

3. Halal Meat Factories

Suitable for halal slaughter processing lines.

4. Frozen Lamb Processing Plants

Supports standardized meat preparation.

Selection conditions and project fit

State incoming product size and temperature, target cut or separation, rate, output specification, interfaces, blade or tool arrangement and guarding requirements. Agree a representative-product trial and the acceptance criteria.

Evidence, configuration and document status

The descriptions and tables below are source-listed reference information, not independently measured results. Confirm material grade, electrical supply, dimensions, duty, guards, controls and delivery scope in the approved quotation and drawing. No model-specific certificate or verified customer installation is established by this page. Request the document issuer, applicable model, scope and revision before relying on a compliance claim.

Source and version

Reference compilation R1, 2026-11-16. Supplied document: 1. 羊致昏 屠宰 放血设备.doc; section 1.4. Configuration rows retain source units. Where the source lists alternatives or several models, each row must be checked as a separate configuration; a capacity or dimension must not be transferred between models.

Installation and process interfaces

Provide product size and condition, target cut or separation, feed/discharge direction, support height and space for tool replacement and maintenance. Confirm the proposed guards, operator access and connection to the receiving station.

Utilities, control and feedback requirements

Check the model-specific drive and electrical or fluid-power supply. Agree start/stop, upstream/downstream interlocks and feedback requirements where relevant. Do not infer a control protocol or tool capability from a family photograph.

Maintenance and part identification

Request the configuration-specific manual and part references for matched blades or tools, drive components, seals and position sensors where fitted. Agree quantities and replenishment needs against actual duty and delivery experience. This page does not prescribe maintenance intervals, repairs or a guaranteed stock position.

Configuration-specific document checklist

Before purchase, identify the complete model and suffix, configuration table and drawing revision. Request the applicable layout/interface drawing, specification, manual, parts list and agreed inspection or test records. Performance curves or certificates should be linked only when an applicable original exists; a reference summary is not a substitute.

Compare configurations for your project

For Sheep Carcass Band Splitting Saw | HT-S220-I, keep the complete identifier HT-S220-I attached to its own source configuration. Compare process duty, incoming animal or product range, target output, utilities, installation envelope and upstream/downstream interfaces under the same project conditions. A higher catalogue rate alone does not establish a better fit.

Start with this page's listed reference fields: Rated Voltage: 380V; Motor Power: 2.2 kW; Maximum Capacity: 80 heads/hour; Machine Size: 1100 × 260 × 450 mm; Suitable Material: Sheep & Goat Carcass. Confirm units, conditions and revision against the quoted configuration; do not transfer values to another model.

Compare alternative quotations only after each supplier identifies the complete model, configuration and matching documents. No universal suffix meaning or unsupported advantage over another model is asserted.

Purchasing review and enquiry preparation

Start with Sheep Carcass Band Splitting Saw | HT-S220-I and its specification/source notes. Download the linked reference summary, then request the original configuration-specific drawing and current technical documents. The summary is not an approved drawing, certificate or acceptance record.

Use the linked sheep & goat processing application and purchasing guidance to review process interfaces, selection conditions and the proposed supply boundary. Verify which manufacturer, supplier and installation responsibilities are included; a reference photo does not establish factory ownership, certification or a completed HUATAO installation.

Before enquiry, prepare animal species or incoming product, size/weight range, target throughput, operating shifts, destination, available utilities and a layout or interface drawing. Quote HT-S220-I and identify the missing documents or conditions you need checked. Use the enquiry on this page so the product and original source page are retained.

Source reference configuration 1
ItemSpecification
Product NameSheep Carcass Band Splitting Saw
ApplicationSheep / Goat Carcass Splitting
ModelHT-S220-I
Rated Voltage380V
Phase / Frequency3 Phase / 50Hz
Motor Power2.2 kW
Maximum Capacity80 heads/hour
Machine Size1100 × 260 × 450 mm
Weight50 kg
Effective Saw Stroke45 mm
Saw Reciprocating Speed24 times/second
Cutting TimeApprox. 2–5 seconds/carcass
Suitable MaterialSheep & Goat Carcass

Buyer FAQ

What is a sheep carcass splitting saw used for?

The machine is used to split complete sheep or goat carcasses into two halves along the backbone before chilling or further meat processing.

What is the production capacity?

The standard model can process approximately 80 sheep/goat carcasses per hour depending on operator efficiency and production conditions.

What information is needed to select this equipment?

State incoming product size and temperature, target cut or separation, rate, output specification, interfaces, blade or tool arrangement and guarding requirements. Agree a representative-product trial and the acceptance criteria.

Are these specifications an approved supply commitment?

No. These are source reference details. The quotation must identify the exact configuration, drawing revision, included documents and agreed acceptance criteria.

Related configurations and guidance

Sheep & goat processing equipment categories Sheep & goat processing process application Check complete model identifiers and suffixes

Reference specification and document status

Download HT-S220-I reference specification and verification checklist

This reference is not an approved manufacturing drawing, inspection report or certificate. Request the configuration-specific documents before purchase.

Applications

Sheep & goat processing workflowExplore sheep & goat processing by process task, source equipment and project conditions.

Capabilities

Sheep & goat processing line planningExplore sheep & goat processing by process task, source equipment and project conditions.

Request specifications

Add company or technical details (optional)

Equipment under review: HT-S220-I

Start with what you know. You can send drawings or photographs by email.

Continue your technical review