SlaughterPro | HUATAOSearch

Sheep Carcass Scalding Tank for Hair Removal Processing

Sheep Carcass Scalding Tank for Hair Removal Processing. Compare product range, residence time and utility conditions; share your requirements for configuration review.

Sheep Carcass Scalding Tank for Hair Removal Processing — source product-family photograph; confirm the quoted configuration

Specification notes

ModelHT-S210-I, HT-S210-II
Configuration basisMultiple source variants; review the separate tables below
Data statusReference information; confirm exact model and drawing revision

Use and process role

Sheep Carcass Scalding Tank for Sheep & Goat Slaughterhouses

The Sheep Carcass Scalding Tank is a professional preparation machine designed for sheep and goat slaughter processing lines before the dehairing stage.

After slaughtering and bleeding, sheep carcasses require proper heat treatment to loosen hair follicles and improve the efficiency of mechanical hair removal.

This scalding tank uses controlled hot water heating technology to maintain a stable temperature environment. The carcass is immersed in heated water for a specific period, allowing the hair roots to soften without damaging the skin quality.

The equipment is available with two heating options:

1. Steam Heating Type

Uses stainless steel steam heating pipes to heat the water efficiently.

2. Electric Heating Type

Uses stainless steel electric heating elements for independent temperature control.

The system is widely used in:

Sheep slaughterhouses

Goat abattoirs

Halal meat processing plants

Lamb processing factories

It can work together with:

Carcass unloading machines

Horizontal carcass dehairing machines

Vertical carcass dehairing machines

Carcass receiving systems

Structure and working principle

The sheep or goat carcass is transferred into the scalding tank after bleeding.

The working process includes:

Water inside the tank is heated by steam pipes or electric heating rods.

The temperature control system maintains the required scalding temperature.

The carcass is immersed in hot water for sufficient time.

Heat penetrates the skin and loosens hair follicles.

The softened carcass is transferred to the dehairing machine for further processing.

The controlled heating process improves hair removal performance while maintaining carcass quality.

Source-listed construction and features

1. Dual Heating Options

The equipment supports:

Steam Heating System

Applications and integration

Sheep & Goat Slaughterhouse Application

The Sheep Carcass Scalding Tank is mainly used after:

Slaughtering

Bleeding

Head and hoof removal

and before:

Mechanical dehairing

Carcass cleaning

Further processing

Typical production flow:

Sheep Slaughter

↓

Carcass Transfer

Scalding Tank

Dehairing Machine

Carcass Processing

Chilling

Suitable Industries

1. Sheep Abattoirs

For commercial sheep slaughter operations.

2. Goat Processing Plants

Suitable for goat carcass hair removal preparation.

3. Halal Meat Processing Factories

Compatible with halal slaughter production lines.

4. Lamb Export Processing Plants

Used for standardized carcass preparation.

Selection conditions and project fit

Define product size, residence time, line speed, water quality, temperature, pressure, flow and drainage. Specify the hygiene process and acceptance method; a machine name does not establish a validated hygiene result.

Evidence, configuration and document status

The descriptions and tables below are source-listed reference information, not independently measured results. Confirm material grade, electrical supply, dimensions, duty, guards, controls and delivery scope in the approved quotation and drawing. No model-specific certificate or verified customer installation is established by this page. Request the document issuer, applicable model, scope and revision before relying on a compliance claim.

Source and version

Reference compilation R1, 2026-11-16. Supplied document: 1. 羊致昏 屠宰 放血设备.doc; section 1.5. Configuration rows retain source units. Where the source lists alternatives or several models, each row must be checked as a separate configuration; a capacity or dimension must not be transferred between models.

Installation and process interfaces

State incoming product condition, process residence time, line speed, working height, water connections, drain location and access for cleaning or component removal. Check the full installation envelope, not only catalogue dimensions.

Utilities, control and feedback requirements

Use only the power, water, heating or cooling values given for the matching source configuration. Confirm operating pressure/flow or temperature, control method and line signals. A reference machine does not establish a validated hygiene or cooling result.

Maintenance and part identification

Request the configuration-specific manual and part references for nozzles, seals, pumps, sensors, conveying elements and any heating/cooling components fitted. Agree quantities and replenishment needs against actual duty and delivery experience. This page does not prescribe maintenance intervals, repairs or a guaranteed stock position.

Configuration-specific document checklist

Before purchase, identify the complete model and suffix, configuration table and drawing revision. Request the applicable layout/interface drawing, specification, manual, parts list and agreed inspection or test records. Performance curves or certificates should be linked only when an applicable original exists; a reference summary is not a substitute.

Source-unit confirmation required

The supplied reference does not explicitly state a unit for these fields: Scalding Temperature. The original entries are retained rather than assigning an assumed unit. Confirm the units, matching configuration and operating conditions before comparing these figures or approving a quotation.

Compare configurations for your project

For Sheep Carcass Scalding Tank for Hair Removal Processing, keep the complete identifier HT-S210-I, HT-S210-II attached to its own source configuration. Compare process duty, incoming animal or product range, target output, utilities, installation envelope and upstream/downstream interfaces under the same project conditions. A higher catalogue rate alone does not establish a better fit.

Start with this page's listed reference fields: Configuration basis: Multiple source variants; review the separate tables below. Confirm units, conditions and revision against the quoted configuration; do not transfer values to another model.

Compare alternative quotations only after each supplier identifies the complete model, configuration and matching documents. No universal suffix meaning or unsupported advantage over another model is asserted.

Purchasing review and enquiry preparation

Start with Sheep Carcass Scalding Tank for Hair Removal Processing and its specification/source notes. Download the linked reference summary, then request the original configuration-specific drawing and current technical documents. The summary is not an approved drawing, certificate or acceptance record.

Use the linked sheep & goat processing application and purchasing guidance to review process interfaces, selection conditions and the proposed supply boundary. Verify which manufacturer, supplier and installation responsibilities are included; a reference photo does not establish factory ownership, certification or a completed HUATAO installation.

Before enquiry, prepare animal species or incoming product, size/weight range, target throughput, operating shifts, destination, available utilities and a layout or interface drawing. Quote HT-S210-I, HT-S210-II and identify the missing documents or conditions you need checked. Use the enquiry on this page so the product and original source page are retained.

Source reference configuration 1
ItemSpecification
Product NameSheep Carcass Scalding Tank
Heating MethodSteam Heating
ApplicationSheep / Goat Carcass Hair Loosening
Scalding Temperature58–62℃
Tank Size1000 × 1600 × 800 mm
Main Frame MaterialHot Galvanized Steel / Stainless Steel
Insulation Layer80 mm Polyurethane
Inner Shell Thickness2 mm Stainless Steel
Heating Component304 Stainless Steel Steam Pipe
Temperature ControlIncluded
Source reference configuration 2
ItemSpecification
Product NameElectric Heating Carcass Scalding Tank
Heating MethodElectric Heating Rod
Power30 kW
Voltage380V / 3 Phase / 50Hz
Scalding Temperature58–62℃
Tank Size1000 × 1600 × 800 mm
Frame MaterialGalvanized Steel / Stainless Steel
Insulation Layer80 mm Polyurethane
Shell Thickness2 mm Stainless Steel
Temperature ControlIncluded

Buyer FAQ

What is the purpose of a sheep carcass scalding tank?

The scalding tank is used to heat sheep or goat carcasses before dehairing, helping loosen hair follicles and improve hair removal efficiency.

What is the recommended scalding temperature?

The normal operating temperature is around 58–62℃, depending on carcass condition and processing requirements.

What is the difference between steam heating and electric heating?

Steam heating: Suitable for factories with existing steam systems Higher efficiency for continuous production Electric heating: Independent operation Easier installation

What information is needed to select this equipment?

Define product size, residence time, line speed, water quality, temperature, pressure, flow and drainage. Specify the hygiene process and acceptance method; a machine name does not establish a validated hygiene result.

Are these specifications an approved supply commitment?

No. These are source reference details. The quotation must identify the exact configuration, drawing revision, included documents and agreed acceptance criteria.

Related configurations and guidance

Sheep & goat processing equipment categories Sheep & goat processing process application Check complete model identifiers and suffixes

Reference specification and document status

Download HT-S210-I, HT-S210-II reference specification and verification checklist

This reference is not an approved manufacturing drawing, inspection report or certificate. Request the configuration-specific documents before purchase.

Applications

Sheep & goat processing workflowExplore sheep & goat processing by process task, source equipment and project conditions.

Capabilities

Sheep & goat processing line planningExplore sheep & goat processing by process task, source equipment and project conditions.

Request specifications

Add company or technical details (optional)

Equipment under review: HT-S210-I, HT-S210-II

Start with what you know. You can send drawings or photographs by email.

Continue your technical review