SlaughterPro | HUATAOSearch

Horizontal Type Sheep Carcass Dehairing Machine | HT-S211-I

Horizontal Type Sheep Carcass Dehairing Machine. Compare incoming condition, product range and processing duty; share your requirements for configuration review.

Horizontal Type Sheep Carcass Dehairing Machine — source product-family photograph; confirm the quoted configuration

Specification notes

ModelHT-S211-I
Rated Voltage380V
Motor Power7.5 kW
Maximum Capacity100 heads/hour
Overall Dimension2653 × 1250 × 1698 mm
Main Frame MaterialHot Galvanized Steel / Stainless Steel
Data statusSource reference R1; configuration requires written confirmation

Use and process role

Horizontal Sheep Carcass Dehairing Machine for Sheep & Goat Processing Line

The Horizontal Type Sheep Carcass Dehairing Machine is specially designed for removing wool and hair from sheep and goat carcasses after the scalding process.

During sheep slaughter processing, carcasses need to be properly scalded before dehairing. The horizontal dehairing machine uses rotating rubber dehairing rollers and hydraulic control technology to remove loosened hair efficiently while protecting the carcass surface.

Compared with manual hair removal methods, this machine provides:

Higher production efficiency

More consistent dehairing results

Reduced labor requirements

Improved processing hygiene

The equipment is widely installed in:

Sheep slaughterhouses

Goat abattoirs

Halal meat processing plants

Lamb processing factories

It can be connected with:

Carcass scalding tanks

Carcass unloading machines

Overhead conveyor systems

Carcass cleaning equipment

The referenced HT HT-S211-I model is designed mainly for removing sheep carcass hair after scalding, with a maximum capacity of around 100 heads/hour and a dehairing rate of ≥92%.

Structure and working principle

After the sheep or goat carcass completes the scalding process, it is transferred into the horizontal dehairing machine.

The working process:

The carcass enters the dehairing chamber.

Hydraulic cylinders adjust the working position according to carcass size.

Rotating rollers equipped with rubber fingers contact the carcass surface.

The loosened wool is removed through mechanical friction and pulling action.

The cleaned carcass exits the machine and continues to the next processing stage.

The hydraulic adjustment system ensures stable contact pressure and improves hair removal performance.

Source-listed construction and features

1. High-Efficiency Hair Removal

The machine uses specially designed rubber dehairing rollers to remove loosened wool quickly.

Benefits:

Short processing time

Higher production capacity

Reduced manual operation

2. Hydraulic Adjustment System

The hydraulic system controls roller movement and pressure.

Applications and integration

Sheep & Goat Slaughterhouse Application

The horizontal carcass dehairing machine is mainly installed after:

Sheep slaughtering

Bleeding

Carcass scalding

and before:

Carcass cleaning

Evisceration

Chilling

Cutting

Typical processing flow:

Live Sheep Handling

↓

Slaughter & Bleeding

Carcass Scalding Tank

Horizontal Dehairing Machine

Carcass Cleaning

Carcass Processing

Suitable Industries

1. Sheep Abattoirs

For commercial sheep slaughter operations.

2. Goat Processing Plants

Suitable for goat carcass hair removal.

3. Halal Meat Processing Factories

Compatible with halal slaughter production lines.

4. Lamb Export Processing Plants

Supports standardized carcass preparation.

Selection conditions and project fit

State species, incoming weight and temperature range, upstream scalding condition, required rate, discharge height, water or energy supply and by-product collection. Agree product quality criteria under the actual input conditions.

Evidence, configuration and document status

The descriptions and tables below are source-listed reference information, not independently measured results. Confirm material grade, electrical supply, dimensions, duty, guards, controls and delivery scope in the approved quotation and drawing. No model-specific certificate or verified customer installation is established by this page. Request the document issuer, applicable model, scope and revision before relying on a compliance claim.

Source and version

Reference compilation R1, 2026-11-16. Supplied document: 1. 羊致昏 屠宰 放血设备.doc; section 1.6. Configuration rows retain source units. Where the source lists alternatives or several models, each row must be checked as a separate configuration; a capacity or dimension must not be transferred between models.

Installation and process interfaces

State the upstream scalding/preparation condition, animal or product range, required rate, discharge height, water or energy connections and collection of hair, feathers or other by-products.

Utilities, control and feedback requirements

Confirm the actual drive arrangement, adjustment range and control scope. Compare performance only under defined input and process conditions; reference rates are not an unconditional yield or quality commitment.

Maintenance and part identification

Request the configuration-specific manual and part references for fingers, rubber elements, scrapers, rollers and drive parts where fitted. Agree quantities and replenishment needs against actual duty and delivery experience. This page does not prescribe maintenance intervals, repairs or a guaranteed stock position.

Configuration-specific document checklist

Before purchase, identify the complete model and suffix, configuration table and drawing revision. Request the applicable layout/interface drawing, specification, manual, parts list and agreed inspection or test records. Performance curves or certificates should be linked only when an applicable original exists; a reference summary is not a substitute.

Compare configurations for your project

For Horizontal Type Sheep Carcass Dehairing Machine | HT-S211-I, keep the complete identifier HT-S211-I attached to its own source configuration. Compare process duty, incoming animal or product range, target output, utilities, installation envelope and upstream/downstream interfaces under the same project conditions. A higher catalogue rate alone does not establish a better fit.

Start with this page's listed reference fields: Rated Voltage: 380V; Motor Power: 7.5 kW; Maximum Capacity: 100 heads/hour; Overall Dimension: 2653 × 1250 × 1698 mm; Main Frame Material: Hot Galvanized Steel / Stainless Steel. Confirm units, conditions and revision against the quoted configuration; do not transfer values to another model.

Compare alternative quotations only after each supplier identifies the complete model, configuration and matching documents. No universal suffix meaning or unsupported advantage over another model is asserted.

Purchasing review and enquiry preparation

Start with Horizontal Type Sheep Carcass Dehairing Machine | HT-S211-I and its specification/source notes. Download the linked reference summary, then request the original configuration-specific drawing and current technical documents. The summary is not an approved drawing, certificate or acceptance record.

Use the linked sheep & goat processing application and purchasing guidance to review process interfaces, selection conditions and the proposed supply boundary. Verify which manufacturer, supplier and installation responsibilities are included; a reference photo does not establish factory ownership, certification or a completed HUATAO installation.

Before enquiry, prepare animal species or incoming product, size/weight range, target throughput, operating shifts, destination, available utilities and a layout or interface drawing. Quote HT-S211-I and identify the missing documents or conditions you need checked. Use the enquiry on this page so the product and original source page are retained.

Source reference configuration 1
ItemSpecification
Product NameHorizontal Sheep Carcass Dehairing Machine
ModelHT-S211-I
ApplicationSheep & Goat Carcass Hair Removal
Rated Voltage380V
Frequency50Hz
Phase3 Phase
Motor Power7.5 kW
Dehairing Effective Length1800 mm
Maximum Capacity100 heads/hour
Dehairing Time30–40 seconds
Dehairing Rate≥92%
Overall Dimension2653 × 1250 × 1698 mm
Main Frame MaterialHot Galvanized Steel / Stainless Steel
Dehairing RollerRubber Roller
Control SystemHydraulic Control System

Buyer FAQ

What is a sheep carcass dehairing machine used for?

It is used to remove wool from sheep and goat carcasses after scalding during slaughter processing.

Why is scalding required before dehairing?

Scalding softens hair roots and improves the efficiency of mechanical hair removal.

What is the processing capacity?

The standard model can process up to approximately 100 heads/hour depending on slaughter line configuration and operating conditions.

What type of heating equipment is required before this machine?

It normally works together with a sheep carcass scalding tank using steam or electric heating.

What information is needed to select this equipment?

State species, incoming weight and temperature range, upstream scalding condition, required rate, discharge height, water or energy supply and by-product collection. Agree product quality criteria under the actual input conditions.

Are these specifications an approved supply commitment?

No. These are source reference details. The quotation must identify the exact configuration, drawing revision, included documents and agreed acceptance criteria.

Related configurations and guidance

Sheep & goat processing equipment categories Sheep & goat processing process application Check complete model identifiers and suffixes

Reference specification and document status

Download HT-S211-I reference specification and verification checklist

This reference is not an approved manufacturing drawing, inspection report or certificate. Request the configuration-specific documents before purchase.

Applications

Sheep & goat processing workflowExplore sheep & goat processing by process task, source equipment and project conditions.

Capabilities

Sheep & goat processing line planningExplore sheep & goat processing by process task, source equipment and project conditions.

Request specifications

Add company or technical details (optional)

Equipment under review: HT-S211-I

Start with what you know. You can send drawings or photographs by email.

Continue your technical review