SlaughterPro | HUATAOSearch

Sheep Carcass Conveyor Machine

Sheep Carcass Conveyor Machine. Compare load range, dimensions and process interfaces; share your requirements for configuration review.

Sheep Carcass Conveyor Machine — supplied product-directory equipment/process illustration; exact model configuration must be confirmed

Supplied product-directory reference image: equipment family or process context. It is not proof of an exact model, HUATAO installation or certification. Confirm the proposed configuration photograph and drawing before ordering.

Specification notes

ModelHT-S205-I, HT-S205-II
Configuration basisMultiple source variants; review the separate tables below
Data statusReference information; confirm exact model and drawing revision

Use and process role

Sheep Carcass Conveyor Machine for Sheep & Goat Slaughterhouse

The Sheep Carcass Conveyor Machine is an essential transportation system used in modern sheep and goat slaughter processing lines.

After bleeding, sheep carcasses are suspended on hooks and transferred through different processing sections by an overhead conveyor system.

The conveyor provides continuous carcass movement during:

Skinning

Head and hoof removal

Evisceration

Veterinary inspection

Carcass cleaning

Weighing

Chilling

Cutting and deboning

Compared with traditional manual handling, the automated carcass conveyor system improves production efficiency, reduces labor requirements and maintains better hygiene standards.

According to different factory layouts and processing requirements, the sheep carcass conveyor can be designed in two main structures:

Horizontal Type Carcass Conveyor

Vertical Type Carcass Conveyor

Both types can use tube rail or dual-orbit rail structures and can be integrated into complete sheep/goat slaughter lines.

Structure and working principle

The sheep carcass conveyor works through a motor-driven rail transmission system.

The operating process:

Sheep carcasses are hung on stainless steel hooks after bleeding.

The drive mechanism moves the chain or trolley along the overhead rail.

Carcasses travel continuously through each processing station.

Workers perform different operations while carcasses remain suspended.

The conveyor transfers finished carcasses to the next processing stage.

The conveyor speed can be adjusted according to production capacity and processing requirements.

Product Types

1. Horizontal Type Sheep Carcass Conveyor

Horizontal Carcass Processing Conveyor Machine

The horizontal conveyor is mainly designed for straight-line carcass transportation.

It is suitable for slaughterhouses with:

Long production workshops

Straight processing layouts

Medium and large capacity requirements

Main Applications

Used for:

Skinning

Evisceration

Inspection

Cleaning

Weighing

Features of Horizontal Conveyor

Straight Transportation Layout

The carcasses move horizontally along the processing line.

Source-listed construction and features

1. Continuous Automatic Transportation

Provides uninterrupted carcass movement throughout the slaughter process.

2. Heavy-Duty Rail Structure

Available structures:

Tube rail system

Dual-orbit rail system

Suitable for continuous operation.

3. Food-Grade Construction

Main materials:

Hot galvanized steel

Stainless steel components

Benefits:

Corrosion resistance

Long service life

Easy sanitation

4. Adjustable Conveyor Speed

Frequency control allows adjustment according to:

Production capacity

Worker speed

Processing requirements

5. Complete Slaughter Line Integration

Can connect with:

Sheep stunning box

Bleeding conveyor

Skinning machine

Evisceration platform

Carcass washing system

Chilling system

Applications and integration

Sheep & Goat Slaughterhouse Application

The Sheep Carcass Conveyor Machine is widely used in:

Sheep slaughterhouses

Goat abattoirs

Halal meat processing plants

Lamb export processing factories

Industrial meat processing facilities

Typical Processing Flow

Live Sheep Receiving

↓

Stunning & Bleeding

Sheep Carcass Conveyor

Skinning

Evisceration

Cleaning

Weighing

Chilling

Cutting & Packaging

Selection conditions and project fit

Provide rail or belt dimensions, working height, travel direction, carrier spacing, load range, speed and upstream/downstream connection drawings. A similar-looking carrier is not proof of fit.

Evidence, configuration and document status

The descriptions and tables below are source-listed reference information, not independently measured results. Confirm material grade, electrical supply, dimensions, duty, guards, controls and delivery scope in the approved quotation and drawing. No model-specific certificate or verified customer installation is established by this page. Request the document issuer, applicable model, scope and revision before relying on a compliance claim.

Source and version

Reference compilation R1, 2026-11-16. Supplied document: 1. 羊致昏 屠宰 放血设备.doc; section 1.7. Configuration rows retain source units. Where the source lists alternatives or several models, each row must be checked as a separate configuration; a capacity or dimension must not be transferred between models.

Installation and process interfaces

Provide the load and product range, travel direction, rail/belt section or mating geometry, working heights, supports and maintenance clearances. Similar appearance is not proof of fit.

Utilities, control and feedback requirements

For powered equipment, confirm the matching drive, supply, control and line signals. For passive components, confirm mechanical interfaces and any requirements of the receiving equipment; no powered or feedback capability should be assumed.

Maintenance and part identification

Request the configuration-specific manual and part references for rollers, chains, hooks, bearings, guides and drive elements where applicable. Agree quantities and replenishment needs against actual duty and delivery experience. This page does not prescribe maintenance intervals, repairs or a guaranteed stock position.

Configuration-specific document checklist

Before purchase, identify the complete model and suffix, configuration table and drawing revision. Request the applicable layout/interface drawing, specification, manual, parts list and agreed inspection or test records. Performance curves or certificates should be linked only when an applicable original exists; a reference summary is not a substitute.

Compare configurations for your project

For Sheep Carcass Conveyor Machine, keep the complete identifier HT-S205-I, HT-S205-II attached to its own source configuration. Compare process duty, incoming animal or product range, target output, utilities, installation envelope and upstream/downstream interfaces under the same project conditions. A higher catalogue rate alone does not establish a better fit.

Start with this page's listed reference fields: Configuration basis: Multiple source variants; review the separate tables below. Confirm units, conditions and revision against the quoted configuration; do not transfer values to another model.

Compare alternative quotations only after each supplier identifies the complete model, configuration and matching documents. No universal suffix meaning or unsupported advantage over another model is asserted.

Purchasing review and enquiry preparation

Start with Sheep Carcass Conveyor Machine and its specification/source notes. Download the linked reference summary, then request the original configuration-specific drawing and current technical documents. The summary is not an approved drawing, certificate or acceptance record.

Use the linked sheep & goat processing application and purchasing guidance to review process interfaces, selection conditions and the proposed supply boundary. Verify which manufacturer, supplier and installation responsibilities are included; a reference photo does not establish factory ownership, certification or a completed HUATAO installation.

Before enquiry, prepare animal species or incoming product, size/weight range, target throughput, operating shifts, destination, available utilities and a layout or interface drawing. Quote HT-S205-I, HT-S205-II and identify the missing documents or conditions you need checked. Use the enquiry on this page so the product and original source page are retained.

Source reference configuration 1
ItemHorizontal TypeVertical Type
Main FunctionStraight carcass transportationVertical transfer and height adjustment
Installation SpaceRequires longer workshop spaceSaves floor space
LayoutStraight production lineMulti-level / complex layout
StructureHorizontal rail systemVertical lifting rail system
Installation CostUsually lowerSlightly higher
MaintenanceEasierRequires more technical installation
Suitable FactoryLong workshopsLimited space factories
Production CapacityMedium & large plantsMedium & large plants
FlexibilityNormalHigher
Source reference configuration 2
ItemSpecification
Product NameSheep Carcass Conveyor Machine
ApplicationSheep & Goat Slaughterhouse
Conveyor TypeHorizontal / Vertical Type
ModelHT-S205-I / HT-S205-II
Voltage380V
Frequency50Hz
Phase3 Phase
Motor Power2.2 kW
Conveyor StructureTube Rail / Dual Orbit Rail
Hanging Distance1200 mm
Maximum CapacityUp to 400 Heads/hour
Rail MaterialHot Galvanized Steel / Stainless Steel
Hook Material304 Stainless Steel
Speed ControlFrequency Conversion Control

Buyer FAQ

What is a sheep carcass conveyor machine?

It is an overhead transportation system used to move sheep and goat carcasses through different slaughter processing stages.

What is the difference between horizontal and vertical carcass conveyors?

Horizontal conveyors transport carcasses mainly along straight lines, while vertical conveyors are designed to transfer carcasses between different heights and save factory space.

Which type is better for a small slaughterhouse?

Horizontal conveyors are usually more economical for simple layouts. Vertical conveyors are recommended when factory space is limited.

What animals can use this conveyor?

The system is mainly designed for sheep and goats but can be customized according to carcass size.

What information is needed to select this equipment?

Provide rail or belt dimensions, working height, travel direction, carrier spacing, load range, speed and upstream/downstream connection drawings. A similar-looking carrier is not proof of fit.

Are these specifications an approved supply commitment?

No. These are source reference details. The quotation must identify the exact configuration, drawing revision, included documents and agreed acceptance criteria.

Related configurations and guidance

Sheep & goat processing equipment categories Sheep & goat processing process application Check complete model identifiers and suffixes

Reference specification and document status

Download HT-S205-I, HT-S205-II reference specification and verification checklist

This reference is not an approved manufacturing drawing, inspection report or certificate. Request the configuration-specific documents before purchase.

Applications

Sheep & goat processing workflowExplore sheep & goat processing by process task, source equipment and project conditions.

Capabilities

Sheep & goat processing line planningExplore sheep & goat processing by process task, source equipment and project conditions.

Request specifications

Add company or technical details (optional)

Equipment under review: HT-S205-I, HT-S205-II

Start with what you know. You can send drawings or photographs by email.

Continue your technical review