Sheep Hooves Hydraulic Shear Sterilizing Device
Sheep Hooves Hydraulic Shear Sterilizing Device. Compare product range, residence time and utility conditions; share your requirements for configuration review.

Specification notes
| Model status | Product family; exact model not identified in the supplied section |
|---|---|
| Sterilizer Material | Stainless Steel |
| Sterilizer Size | 660 × 360 × 800 mm |
| Data status | Source reference R1; configuration requires written confirmation |
Use and process role
Sheep Hooves Hydraulic Shear Sterilizing Device for Sheep & Goat Slaughterhouses
The Sheep Hooves Hydraulic Shear Sterilizing Device is specially designed for sheep and goat slaughter processing lines, combining two important functions:
Hydraulic hoof cutting
Cutting tool sterilization
During sheep and goat slaughter operations, hooves need to be removed efficiently before carcass processing and further handling. Traditional manual cutting requires high labor intensity and may affect processing speed.
This hydraulic hoof shear provides a faster and more stable cutting solution by using hydraulic power to drive the cutting blades.
After cutting, the shear blade can be placed into the sterilizing tank to reduce bacterial contamination and maintain hygienic processing conditions.
The equipment is widely applied in:
Sheep slaughterhouses
Goat abattoirs
Halal meat processing plants
Livestock processing factories
The referenced HT model is designed for sheep/goat hoof cutting and sterilization, with a stainless steel sterilizing device structure and compact installation size.
Structure and working principle
The hydraulic hoof shear sterilizing system works through hydraulic pressure.
The operation process:
The operator positions the sheep/goat hoof at the cutting area.
The hydraulic system generates pressure to drive the shear blades.
The blades quickly cut through the hoof.
After operation, the shear is placed into the sterilizing device.
Hot water or sterilizing liquid cleans and disinfects the cutting blades before the next use.
The combination of hydraulic cutting and sterilization improves working efficiency and supports better hygiene management in slaughterhouses.
Source-listed construction and features
1. Hydraulic Cutting System
The hydraulic drive provides strong cutting force.
Applications and integration
Sheep & Goat Slaughterhouse Application
The Sheep Hooves Hydraulic Shear Sterilizing Device is mainly used after slaughter and bleeding procedures.
Typical process flow:
Live Sheep Receiving
↓
Stunning
Bleeding
Hoof Removal
Hoof Shear Sterilization
Skinning
Evisceration
Carcass Processing
Suitable Applications
1. Sheep Slaughter Plants
Used for efficient hoof removal during carcass preparation.
2. Goat Meat Processing Facilities
Suitable for goat slaughter lines requiring hygienic hoof processing.
3. Halal Meat Processing Plants
Supports standardized halal slaughter workflows.
4. Industrial Abattoirs
Suitable for continuous livestock processing operations.
Selection conditions and project fit
Define product size, residence time, line speed, water quality, temperature, pressure, flow and drainage. Specify the hygiene process and acceptance method; a machine name does not establish a validated hygiene result.
Evidence, configuration and document status
The descriptions and tables below are source-listed reference information, not independently measured results. Confirm material grade, electrical supply, dimensions, duty, guards, controls and delivery scope in the approved quotation and drawing. No model-specific certificate or verified customer installation is established by this page. Request the document issuer, applicable model, scope and revision before relying on a compliance claim.
Source and version
Reference compilation R1, 2026-11-16. Supplied document: 1. 羊致昏 屠宰 放血设备.doc; section 1.8. Configuration rows retain source units. Where the source lists alternatives or several models, each row must be checked as a separate configuration; a capacity or dimension must not be transferred between models.
Installation and process interfaces
State incoming product condition, process residence time, line speed, working height, water connections, drain location and access for cleaning or component removal. Check the full installation envelope, not only catalogue dimensions.
Utilities, control and feedback requirements
Use only the power, water, heating or cooling values given for the matching source configuration. Confirm operating pressure/flow or temperature, control method and line signals. A reference machine does not establish a validated hygiene or cooling result.
Maintenance and part identification
Request the configuration-specific manual and part references for nozzles, seals, pumps, sensors, conveying elements and any heating/cooling components fitted. Agree quantities and replenishment needs against actual duty and delivery experience. This page does not prescribe maintenance intervals, repairs or a guaranteed stock position.
Configuration-specific document checklist
Before purchase, identify the complete model and suffix, configuration table and drawing revision. Request the applicable layout/interface drawing, specification, manual, parts list and agreed inspection or test records. Performance curves or certificates should be linked only when an applicable original exists; a reference summary is not a substitute.
Compare configurations for your project
For Sheep Hooves Hydraulic Shear Sterilizing Device, keep the complete identifier the proposed complete model and configuration attached to its own source configuration. Compare process duty, incoming animal or product range, target output, utilities, installation envelope and upstream/downstream interfaces under the same project conditions. A higher catalogue rate alone does not establish a better fit.
Start with this page's listed reference fields: Model status: Product family; exact model not identified in the supplied section; Sterilizer Material: Stainless Steel; Sterilizer Size: 660 × 360 × 800 mm. Confirm units, conditions and revision against the quoted configuration; do not transfer values to another model.
Compare alternative quotations only after each supplier identifies the complete model, configuration and matching documents. No universal suffix meaning or unsupported advantage over another model is asserted.
Purchasing review and enquiry preparation
Start with Sheep Hooves Hydraulic Shear Sterilizing Device and its specification/source notes. Download the linked reference summary, then request the original configuration-specific drawing and current technical documents. The summary is not an approved drawing, certificate or acceptance record.
Use the linked sheep & goat processing application and purchasing guidance to review process interfaces, selection conditions and the proposed supply boundary. Verify which manufacturer, supplier and installation responsibilities are included; a reference photo does not establish factory ownership, certification or a completed HUATAO installation.
Before enquiry, prepare animal species or incoming product, size/weight range, target throughput, operating shifts, destination, available utilities and a layout or interface drawing. Quote the proposed complete model and configuration and identify the missing documents or conditions you need checked. Use the enquiry on this page so the product and original source page are retained.
| Item | Specification |
|---|---|
| Product Name | Sheep Hooves Hydraulic Shear Sterilizing Device |
| Application | Sheep & Goat Slaughterhouse |
| Main Function | Hoof Cutting + Shear Sterilization |
| Sterilizer Material | Stainless Steel |
| Sterilizer Size | 660 × 360 × 800 mm |
| Stainless Steel Thickness | 2 mm |
| Hydraulic Operation | Available |
| Cutting Method | Hydraulic Shearing |
| Suitable Animals | Sheep, Goat, Lamb |
| Installation Type | Fixed / Processing Station Installation |
Buyer FAQ
What is a sheep hooves hydraulic shear sterilizing device used for?
It is used for cutting sheep and goat hooves efficiently and sterilizing the cutting blades during slaughter processing.
Why does the shear need sterilization?
Sterilization helps clean the cutting tools and reduces the risk of cross contamination during continuous slaughter operations.
What material is used for the sterilizing tank?
The sterilizing device is made from stainless steel for corrosion resistance and easy sanitation.
Where is this equipment installed in the slaughter line?
It is normally installed after bleeding and before further carcass processing.
What information is needed to select this equipment?
Define product size, residence time, line speed, water quality, temperature, pressure, flow and drainage. Specify the hygiene process and acceptance method; a machine name does not establish a validated hygiene result.
Are these specifications an approved supply commitment?
No. These are source reference details. The quotation must identify the exact configuration, drawing revision, included documents and agreed acceptance criteria.
Related configurations and guidance
Reference specification and document status
This reference is not an approved manufacturing drawing, inspection report or certificate. Request the configuration-specific documents before purchase.