Sheep Goat Hooves Hydraulic Shear Machine | HT-S255
Sheep Goat Hooves Hydraulic Shear Machine. Compare input range, required output and working interfaces; share your requirements for configuration review.

Specification notes
| Model | HT-S255 |
|---|---|
| Rated Voltage | 380V |
| Motor Power | 4 kW |
| Blade Opening Size | 90 mm |
| Data status | Source reference R1; configuration requires written confirmation |
Use and process role
Hydraulic Hoof Shear Machine for Sheep & Goat Slaughterhouses
The Sheep Goat Hooves Hydraulic Shear Machine is a professional cutting device designed for sheep and goat slaughter processing lines.
During livestock slaughter operations, hooves and certain hard parts need to be removed quickly before further carcass processing. Traditional manual cutting methods require high labor intensity and may reduce production efficiency.
This hydraulic hoof shear uses a powerful hydraulic drive system to generate stable cutting force, allowing operators to quickly remove sheep and goat hooves with less physical effort.
Compared with manual hoof cutting tools, the hydraulic shear provides:
Faster cutting speed
Higher working efficiency
More stable cutting performance
Reduced operator fatigue
The equipment is suitable for:
Sheep slaughterhouses
Goat abattoirs
Halal meat processing plants
Livestock processing factories
The HT HT-S255 model is designed mainly for cutting sheep/goat hooves and uses hydraulic working principles with a 4kW hydraulic power system.
Structure and working principle
The hydraulic hoof shear operates through a hydraulic power system.
The working process:
The operator positions the sheep or goat hoof inside the shear opening.
The hydraulic station generates high-pressure hydraulic force.
The hydraulic cylinder drives the cutting blades to close.
The hoof is quickly cut through.
The blade returns to the original position for the next operation.
The hydraulic system provides strong and stable cutting force, ensuring efficient hoof removal during continuous slaughter operations.
Source-listed construction and features
1. Powerful Hydraulic Cutting System
The hydraulic drive provides strong cutting force compared with manual tools.
Applications and integration
Sheep & Goat Slaughterhouse Application
The hydraulic hoof shear is mainly used during the early carcass processing stage.
Typical process:
Live Sheep Receiving
↓
Stunning
Bleeding
Hoof Cutting
Carcass Processing
Skinning
Evisceration
Chilling
Suitable Industries
1. Sheep Slaughter Plants
Used for rapid hoof removal during slaughter processing.
2. Goat Processing Facilities
Suitable for goat meat production lines.
3. Halal Meat Processing Plants
Compatible with halal sheep/goat slaughter workflows.
4. Small and Medium Abattoirs
Ideal for plants requiring efficient manual-assisted processing.
Selection conditions and project fit
State incoming product size and temperature, target cut or separation, rate, output specification, interfaces, blade or tool arrangement and guarding requirements. Agree a representative-product trial and the acceptance criteria.
Evidence, configuration and document status
The descriptions and tables below are source-listed reference information, not independently measured results. Confirm material grade, electrical supply, dimensions, duty, guards, controls and delivery scope in the approved quotation and drawing. No model-specific certificate or verified customer installation is established by this page. Request the document issuer, applicable model, scope and revision before relying on a compliance claim.
Source and version
Reference compilation R1, 2026-11-16. Supplied document: 1. 羊致昏 屠宰 放血设备.doc; section 1.9. Configuration rows retain source units. Where the source lists alternatives or several models, each row must be checked as a separate configuration; a capacity or dimension must not be transferred between models.
Installation and process interfaces
Provide product size and condition, target cut or separation, feed/discharge direction, support height and space for tool replacement and maintenance. Confirm the proposed guards, operator access and connection to the receiving station.
Utilities, control and feedback requirements
Check the model-specific drive and electrical or fluid-power supply. Agree start/stop, upstream/downstream interlocks and feedback requirements where relevant. Do not infer a control protocol or tool capability from a family photograph.
Maintenance and part identification
Request the configuration-specific manual and part references for matched blades or tools, drive components, seals and position sensors where fitted. Agree quantities and replenishment needs against actual duty and delivery experience. This page does not prescribe maintenance intervals, repairs or a guaranteed stock position.
Configuration-specific document checklist
Before purchase, identify the complete model and suffix, configuration table and drawing revision. Request the applicable layout/interface drawing, specification, manual, parts list and agreed inspection or test records. Performance curves or certificates should be linked only when an applicable original exists; a reference summary is not a substitute.
Compare configurations for your project
For Sheep Goat Hooves Hydraulic Shear Machine | HT-S255, keep the complete identifier HT-S255 attached to its own source configuration. Compare process duty, incoming animal or product range, target output, utilities, installation envelope and upstream/downstream interfaces under the same project conditions. A higher catalogue rate alone does not establish a better fit.
Start with this page's listed reference fields: Rated Voltage: 380V; Motor Power: 4 kW; Blade Opening Size: 90 mm. Confirm units, conditions and revision against the quoted configuration; do not transfer values to another model.
Compare alternative quotations only after each supplier identifies the complete model, configuration and matching documents. No universal suffix meaning or unsupported advantage over another model is asserted.
Purchasing review and enquiry preparation
Start with Sheep Goat Hooves Hydraulic Shear Machine | HT-S255 and its specification/source notes. Download the linked reference summary, then request the original configuration-specific drawing and current technical documents. The summary is not an approved drawing, certificate or acceptance record.
Use the linked sheep & goat processing application and purchasing guidance to review process interfaces, selection conditions and the proposed supply boundary. Verify which manufacturer, supplier and installation responsibilities are included; a reference photo does not establish factory ownership, certification or a completed HUATAO installation.
Before enquiry, prepare animal species or incoming product, size/weight range, target throughput, operating shifts, destination, available utilities and a layout or interface drawing. Quote HT-S255 and identify the missing documents or conditions you need checked. Use the enquiry on this page so the product and original source page are retained.
| Item | Specification |
|---|---|
| Product Name | Sheep Goat Hooves Hydraulic Shear |
| Model | HT-S255 |
| Application | Sheep & Goat Slaughterhouse |
| Working Principle | Hydraulic Drive |
| Rated Voltage | 380V |
| Frequency | 50Hz |
| Phase | 3 Phase |
| Motor Power | 4 kW |
| Hydraulic Pressure | 180 bar |
| Blade Opening Size | 90 mm |
| Working Speed | Approx. 3 seconds / cycle |
| Weight | Approx. 3.9 kg |
| Main Components | Hydraulic station, balance system, high-pressure hose, connectors |
| Suitable Animals | Sheep, Goat, Lamb |
Buyer FAQ
What is a sheep hooves hydraulic shear used for?
It is used to cut sheep and goat hooves quickly during slaughter processing.
How does hydraulic hoof shear work?
The hydraulic station generates high-pressure oil flow, driving the cutting blade through a hydraulic cylinder.
What is the cutting capacity of this hydraulic shear?
The equipment can complete one cutting cycle in approximately 3 seconds depending on operation conditions.
Does this machine require compressed air?
No. This model mainly operates through a hydraulic power system.
What information is needed to select this equipment?
State incoming product size and temperature, target cut or separation, rate, output specification, interfaces, blade or tool arrangement and guarding requirements. Agree a representative-product trial and the acceptance criteria.
Are these specifications an approved supply commitment?
No. These are source reference details. The quotation must identify the exact configuration, drawing revision, included documents and agreed acceptance criteria.
Related configurations and guidance
Reference specification and document status
Download HT-S255 reference specification and verification checklist
This reference is not an approved manufacturing drawing, inspection report or certificate. Request the configuration-specific documents before purchase.