SlaughterPro | HUATAOSearch

Sheep Carcass Overhead Rail Scale | HT-S217

Sheep Carcass Overhead Rail Scale. Compare load range, weighing method and line interfaces; share your requirements for configuration review.

Sheep Carcass Overhead Rail Scale | HT-S217 — supplied product-directory equipment/process illustration; exact model configuration must be confirmed

Supplied product-directory reference image: equipment family or process context. It is not proof of an exact model, HUATAO installation or certification. Confirm the proposed configuration photograph and drawing before ordering.

Specification notes

ModelHT-S217
Maximum capacity300 kg
Load cellsTwo high-precision load cells
Data statusSource reference R1; configuration requires written confirmation

Use and process role

The Sheep Carcass Overhead Rail Scale weighs a suspended carcass without taking it off the processing rail. A short live-rail section is supported by two load cells, and the indicator converts the measured force into a weight reading. This arrangHTnt keeps product movHTnt continuous and provides a natural data point between final dressing and chilling.

The reference scale has a 300 kg maximum load and 50 g readability, with an 800–1,000 mm weighing rail section. A display and printer are listed. Several rail profiles are offered, including tubular, twin-angle and flat-track formats. Legal-for-trade use, calibration division and printer data fields depend on the destination country; the source specification alone does not establish metrology approval.

Structure and working principle

The carcass trolley rolls from the fixed approach rail onto the isolated weighing section. Two precision load cells sense the applied load while the surrounding structure remains mechanically separated from the live rail. Once movHTnt settles, the indicator displays the stable weight and can send a record to the printer or another data system. The trolley then moves onto the departure rail. Correct approach alignment, freedom from pipe contact and a stable supporting structure are essential for repeatable readings.

Source-listed construction and features

In-line weighing without removing the carcass from the overhead rail

300 kg reference capacity with 50 g display readability

Two precision load cells

800–1,000 mm weighing rail section

LCD indicator with printing provision

Multiple rail-profile options for integration into new or existing tracks

Selection conditions and project fit

Specify maximum and minimum load, required division, static or dynamic operation, line speed, calibration requirements and the data interface. Confirm any legal-for-trade requirement separately.

Evidence, configuration and document status

The descriptions and tables below are source-listed reference information, not independently measured results. Confirm material grade, electrical supply, dimensions, duty, guards, controls and delivery scope in the approved quotation and drawing. No model-specific certificate or verified customer installation is established by this page. Request the document issuer, applicable model, scope and revision before relying on a compliance claim.

Source and version

Reference compilation R1, 2026-11-16. Supplied document: 2. 羊剥皮 内脏处理 称重 清洗设备.doc; section 2.11. Configuration rows retain source units. Where the source lists alternatives or several models, each row must be checked as a separate configuration; a capacity or dimension must not be transferred between models.

Installation and process interfaces

Specify rail/platform geometry, mechanical isolation, stable support, transfer height and access for calibration. State static or dynamic weighing and the required data connection.

Utilities, control and feedback requirements

Ask which indicator, sensor and output signals are included. State the required division and destination-specific verification needs; no legal-for-trade approval is established by a generic reference.

Maintenance and part identification

Request the configuration-specific manual and part references for load cells, indicator, cables and mounting components. Agree quantities and replenishment needs against actual duty and delivery experience. This page does not prescribe maintenance intervals, repairs or a guaranteed stock position.

Configuration-specific document checklist

Before purchase, identify the complete model and suffix, configuration table and drawing revision. Request the applicable layout/interface drawing, specification, manual, parts list and agreed inspection or test records. Performance curves or certificates should be linked only when an applicable original exists; a reference summary is not a substitute.

Compare configurations for your project

For Sheep Carcass Overhead Rail Scale | HT-S217, keep the complete identifier HT-S217 attached to its own source configuration. Compare process duty, incoming animal or product range, target output, utilities, installation envelope and upstream/downstream interfaces under the same project conditions. A higher catalogue rate alone does not establish a better fit.

Start with this page's listed reference fields: Maximum capacity: 300 kg; Load cells: Two high-precision load cells. Confirm units, conditions and revision against the quoted configuration; do not transfer values to another model.

Compare alternative quotations only after each supplier identifies the complete model, configuration and matching documents. No universal suffix meaning or unsupported advantage over another model is asserted.

Purchasing review and enquiry preparation

Start with Sheep Carcass Overhead Rail Scale | HT-S217 and its specification/source notes. Download the linked reference summary, then request the original configuration-specific drawing and current technical documents. The summary is not an approved drawing, certificate or acceptance record.

Use the linked sheep & goat processing application and purchasing guidance to review process interfaces, selection conditions and the proposed supply boundary. Verify which manufacturer, supplier and installation responsibilities are included; a reference photo does not establish factory ownership, certification or a completed HUATAO installation.

Before enquiry, prepare animal species or incoming product, size/weight range, target throughput, operating shifts, destination, available utilities and a layout or interface drawing. Quote HT-S217 and identify the missing documents or conditions you need checked. Use the enquiry on this page so the product and original source page are retained.

Source reference configuration 1
PARAMETERREFERENCE SPECIFICATION
Reference modelHT-S217
Maximum capacity300 kg
Readability50 g
Weigh rail length800–1,000 mm
Load cellsTwo high-precision load cells
DisplayLCD indicator
PrinterIncluded in the reference description
Rail optionsØ60 × 4 mm tube; twin 40 × 40 × 4 mm; or 60 × 10 mm flat rail
Connectors and boltsStainless steel
Trade approval / accuracy classNot stated; confirm for destination market

Buyer FAQ

Can the scale weigh moving carcasses?

The source does not claim dynamic weighing. Plan for a stable or briefly stopped trolley unless a validated in-motion package is quoted.

Why are straight approach and departure rails important?

Rail curves, switches or steep gradients can keep the load moving and transmit unwanted forces into the weighing section.

Can the scale send data to production software?

Possibly, but the communication port and protocol are not stated. Specify Ethernet, serial, fieldbus or other required output in the enquiry.

What calibration equipment is needed?

Use traceable test weights and a safe loading method appropriate to the local metrology procedure. Never improvise a suspended test load without an approved lifting plan.

What information is needed to select this equipment?

Specify maximum and minimum load, required division, static or dynamic operation, line speed, calibration requirements and the data interface. Confirm any legal-for-trade requirement separately.

Are these specifications an approved supply commitment?

No. These are source reference details. The quotation must identify the exact configuration, drawing revision, included documents and agreed acceptance criteria.

Related configurations and guidance

Sheep & goat processing equipment categories Sheep & goat processing process application Check complete model identifiers and suffixes

Reference specification and document status

Download HT-S217 reference specification and verification checklist

This reference is not an approved manufacturing drawing, inspection report or certificate. Request the configuration-specific documents before purchase.

Applications

Sheep & goat processing workflowExplore sheep & goat processing by process task, source equipment and project conditions.

Capabilities

Sheep & goat processing line planningExplore sheep & goat processing by process task, source equipment and project conditions.

Request specifications

Add company or technical details (optional)

Equipment under review: HT-S217

Start with what you know. You can send drawings or photographs by email.

Continue your technical review