Ground Type Sheep Offal Synchronous Inspection Conveyor | HT-S215-I
Ground Type Sheep Offal Synchronous Inspection Conveyor. Compare load range, dimensions and process interfaces; share your requirements for configuration review.

Supplied product-directory reference image: equipment family or process context. It is not proof of an exact model, HUATAO installation or certification. Confirm the proposed configuration photograph and drawing before ordering.
Specification notes
| Model | HT-S215-I |
|---|---|
| Installed power | 2.2 kW |
| Maximum stated capacity | 400 head/hour |
| Data status | Source reference R1; configuration requires written confirmation |
Use and process role
The Ground Type Sheep Offal Synchronous Inspection Conveyor presents white and red viscera beside the matching carcass as it passes the veterinary inspection point. Its floor-supported frame makes the carrier path easy to place at working height and can simplify service access where overhead steel is limited. The conveyor is intended to be part of a coordinated inspection line, not merely a transfer belt.
The listed arrangHTnt uses a 500 mm white-offal tray and a smaller 300 mm red-offal tray at each repeated station. Stainless components are used for the carriers, with a galvanized or stainless main frame option. A hook sterilizer is included in the reference description. The exact length, number of stations and return-line washing arrangHTnt must be developed from the required dwell time and building layout.
Structure and working principle
At evisceration, operators load the white and red viscera onto the paired carriers assigned to one carcass. The conveyor advances on a 1,200 mm pitch in step with the carcass rail. Inspection staff view the carcass and both offal groups before disposition. Accepted organs are unloaded into their next process; suspect or condemned material is diverted according to the plant procedure. Empty trays and hooks continue through their cleaning or sterilizing route and return to the loading station.
Source-listed construction and features
Ground-supported format for accessible installation and maintenance
Paired white- and red-offal carriers for synchronous inspection
Reference throughput up to 400 head per hour
1,200 mm carrier pitch for correlation with the carcass line
304 stainless trays with 500 mm and 300 mm nominal diameters
Choice of galvanized or stainless main frame, plus hook sterilizer
Selection conditions and project fit
Provide rail or belt dimensions, working height, travel direction, carrier spacing, load range, speed and upstream/downstream connection drawings. A similar-looking carrier is not proof of fit.
Evidence, configuration and document status
The descriptions and tables below are source-listed reference information, not independently measured results. Confirm material grade, electrical supply, dimensions, duty, guards, controls and delivery scope in the approved quotation and drawing. No model-specific certificate or verified customer installation is established by this page. Request the document issuer, applicable model, scope and revision before relying on a compliance claim.
Source and version
Reference compilation R1, 2026-11-16. Supplied document: 2. 羊剥皮 内脏处理 称重 清洗设备.doc; section 2.6. Configuration rows retain source units. Where the source lists alternatives or several models, each row must be checked as a separate configuration; a capacity or dimension must not be transferred between models.
Installation and process interfaces
Provide the load and product range, travel direction, rail/belt section or mating geometry, working heights, supports and maintenance clearances. Similar appearance is not proof of fit.
Utilities, control and feedback requirements
For powered equipment, confirm the matching drive, supply, control and line signals. For passive components, confirm mechanical interfaces and any requirements of the receiving equipment; no powered or feedback capability should be assumed.
Maintenance and part identification
Request the configuration-specific manual and part references for rollers, chains, hooks, bearings, guides and drive elements where applicable. Agree quantities and replenishment needs against actual duty and delivery experience. This page does not prescribe maintenance intervals, repairs or a guaranteed stock position.
Configuration-specific document checklist
Before purchase, identify the complete model and suffix, configuration table and drawing revision. Request the applicable layout/interface drawing, specification, manual, parts list and agreed inspection or test records. Performance curves or certificates should be linked only when an applicable original exists; a reference summary is not a substitute.
Compare configurations for your project
For Ground Type Sheep Offal Synchronous Inspection Conveyor | HT-S215-I, keep the complete identifier HT-S215-I attached to its own source configuration. Compare process duty, incoming animal or product range, target output, utilities, installation envelope and upstream/downstream interfaces under the same project conditions. A higher catalogue rate alone does not establish a better fit.
Start with this page's listed reference fields: Installed power: 2.2 kW; Maximum stated capacity: 400 head/hour. Confirm units, conditions and revision against the quoted configuration; do not transfer values to another model.
Compare alternative quotations only after each supplier identifies the complete model, configuration and matching documents. No universal suffix meaning or unsupported advantage over another model is asserted.
Purchasing review and enquiry preparation
Start with Ground Type Sheep Offal Synchronous Inspection Conveyor | HT-S215-I and its specification/source notes. Download the linked reference summary, then request the original configuration-specific drawing and current technical documents. The summary is not an approved drawing, certificate or acceptance record.
Use the linked sheep & goat processing application and purchasing guidance to review process interfaces, selection conditions and the proposed supply boundary. Verify which manufacturer, supplier and installation responsibilities are included; a reference photo does not establish factory ownership, certification or a completed HUATAO installation.
Before enquiry, prepare animal species or incoming product, size/weight range, target throughput, operating shifts, destination, available utilities and a layout or interface drawing. Quote HT-S215-I and identify the missing documents or conditions you need checked. Use the enquiry on this page so the product and original source page are retained.
| PARAMETER | REFERENCE SPECIFICATION |
|---|---|
| Reference model | HT-S215-I |
| Electrical supply | 380 V / 3 phase / 50 Hz |
| Installed power | 2.2 kW |
| Maximum stated capacity | 400 head/hour |
| Carrier pitch | 1,200 mm |
| White-offal tray | Ø500 mm, 304 stainless steel |
| Red-offal tray | Ø300 mm, stainless steel |
| Main frame | Galvanized steel or stainless steel |
| Sanitation provision | Hook sterilizer; confirm tray-wash system |
| Overall length / working height | Project-specific |
Buyer FAQ
What is the difference between this model and the hanging type?
This unit is supported from the floor and is listed at up to 400 head/hour. The hanging model uses overhead support and is listed at up to 300 head/hour.
Is the conveyor length fixed?
No. Length, station count and return path should be calculated from line rate, pitch, inspection dwell and available space.
Are both trays made from 304 stainless steel?
The source explicitly identifies the white tray as 304 stainless and describes the red tray as stainless. Confirm the exact grade for all carriers in the order.
Can galvanized framing be used in the wet zone?
It is an offered option, but many buyers choose stainless in intensive washdown areas. Review lifecycle cost and local hygiene requirHTnts.
Which spare parts are most important?
Keep conveyor chain links, sprocket components, carrier brackets, bearings, sensors, drive seals and sterilizer fittings matched to the final design.
What information is needed to select this equipment?
Provide rail or belt dimensions, working height, travel direction, carrier spacing, load range, speed and upstream/downstream connection drawings. A similar-looking carrier is not proof of fit.
Are these specifications an approved supply commitment?
No. These are source reference details. The quotation must identify the exact configuration, drawing revision, included documents and agreed acceptance criteria.
Related configurations and guidance
Reference specification and document status
Download HT-S215-I reference specification and verification checklist
This reference is not an approved manufacturing drawing, inspection report or certificate. Request the configuration-specific documents before purchase.