Sheep and Goat Hoof Dehairing Machine | HT-S307
Sheep and Goat Hoof Dehairing Machine. Compare incoming condition, product range and processing duty; share your requirements for configuration review.

Specification notes
| Model | HT-S307 |
|---|---|
| Installed power | 7.5 kW |
| Batch size / cycle time | Not stated; confirm through product testing |
| Data status | Source reference R1; configuration requires written confirmation |
Use and process role
The Sheep and Goat Hoof Dehairing Machine removes loosened hair and surface residue from pre-scalded feet. A rotating internal grid tumbles the batch so that friction works around irregular hoof surfaces. This is a by-product processing machine, not a scalding vessel: best results depend on correct hot-water preparation before loading.
The reference unit has a 1.2 m drum and a 7.5 kW drive. Base, shell and rotary grid are stainless steel, and the machine includes hot/cold water mixing and a drain outlet. The stated output is 1,440 sheep hooves per hour. That figure should be converted into realistic batch weight and cycle time during selection, because raw-material size and scald quality affect each load.
Structure and working principle
Pre-scalded hooves are loaded into the drum and the cover is secured. The motor rotates the internal grid, causing the hooves to tumble and rub against the working surfaces and one another. Warm water supplied through the mixing valve carries loosened hair and debris toward the drain. After the timed cycle, the drum stops and the cleaned batch is discharged for inspection and any manual finishing. The machine is rinsed between production lots and opened for full sanitation after use.
Source-listed construction and features
Designed for pre-scalded sheep and goat hooves
Large 1.2 m rotary drum for batch processing
Stainless base, shell and internal rotary grid
Hot/cold water mixing valve and drain connection
Maximum listed throughput of 1,440 hooves per hour
Selection conditions and project fit
State species, incoming weight and temperature range, upstream scalding condition, required rate, discharge height, water or energy supply and by-product collection. Agree product quality criteria under the actual input conditions.
Evidence, configuration and document status
The descriptions and tables below are source-listed reference information, not independently measured results. Confirm material grade, electrical supply, dimensions, duty, guards, controls and delivery scope in the approved quotation and drawing. No model-specific certificate or verified customer installation is established by this page. Request the document issuer, applicable model, scope and revision before relying on a compliance claim.
Source and version
Reference compilation R1, 2026-11-16. Supplied document: 2. 羊剥皮 内脏处理 称重 清洗设备.doc; section 2.9. Configuration rows retain source units. Where the source lists alternatives or several models, each row must be checked as a separate configuration; a capacity or dimension must not be transferred between models.
Installation and process interfaces
State the upstream scalding/preparation condition, animal or product range, required rate, discharge height, water or energy connections and collection of hair, feathers or other by-products.
Utilities, control and feedback requirements
Confirm the actual drive arrangement, adjustment range and control scope. Compare performance only under defined input and process conditions; reference rates are not an unconditional yield or quality commitment.
Maintenance and part identification
Request the configuration-specific manual and part references for fingers, rubber elements, scrapers, rollers and drive parts where fitted. Agree quantities and replenishment needs against actual duty and delivery experience. This page does not prescribe maintenance intervals, repairs or a guaranteed stock position.
Configuration-specific document checklist
Before purchase, identify the complete model and suffix, configuration table and drawing revision. Request the applicable layout/interface drawing, specification, manual, parts list and agreed inspection or test records. Performance curves or certificates should be linked only when an applicable original exists; a reference summary is not a substitute.
Compare configurations for your project
For Sheep and Goat Hoof Dehairing Machine | HT-S307, keep the complete identifier HT-S307 attached to its own source configuration. Compare process duty, incoming animal or product range, target output, utilities, installation envelope and upstream/downstream interfaces under the same project conditions. A higher catalogue rate alone does not establish a better fit.
Start with this page's listed reference fields: Installed power: 7.5 kW; Batch size / cycle time: Not stated; confirm through product testing. Confirm units, conditions and revision against the quoted configuration; do not transfer values to another model.
Compare alternative quotations only after each supplier identifies the complete model, configuration and matching documents. No universal suffix meaning or unsupported advantage over another model is asserted.
Purchasing review and enquiry preparation
Start with Sheep and Goat Hoof Dehairing Machine | HT-S307 and its specification/source notes. Download the linked reference summary, then request the original configuration-specific drawing and current technical documents. The summary is not an approved drawing, certificate or acceptance record.
Use the linked sheep & goat processing application and purchasing guidance to review process interfaces, selection conditions and the proposed supply boundary. Verify which manufacturer, supplier and installation responsibilities are included; a reference photo does not establish factory ownership, certification or a completed HUATAO installation.
Before enquiry, prepare animal species or incoming product, size/weight range, target throughput, operating shifts, destination, available utilities and a layout or interface drawing. Quote HT-S307 and identify the missing documents or conditions you need checked. Use the enquiry on this page so the product and original source page are retained.
| PARAMETER | REFERENCE SPECIFICATION |
|---|---|
| Reference model | HT-S307 |
| Electrical supply | 380 V / 3 phase / 50 Hz |
| Installed power | 7.5 kW |
| Drum diameter | 1.2 m |
| Required scalding temperature | 58–62°C |
| Maximum stated output | 1,440 sheep hooves/hour |
| Base, shell and rotary grid | Stainless steel |
| Water control | Hot/cold mixing valve |
| Drainage | Drain outlet included |
| Batch size / cycle time | Not stated; confirm through product testing |
Buyer FAQ
Can raw, unscalded hooves be loaded?
No. The machine is intended to remove hair that has already been loosened by scalding.
How is the 1,440-hoof capacity calculated?
The source gives an hourly maximum but not batch size or cycle duration. Ask the supplier to provide the operating basis.
Will the machine remove every hair?
Mechanical dehairing normally requires some inspection and occasional manual finishing, especially when scalding is uneven.
How should drain blockage be prevented?
Install a removable hair screen or solids trap and clean it at a frequency set by actual loading.
What are the main wear parts?
Check grid elHTnts, bearings, seals, drive belts or coupling, door gasket, latch, spray fittings and the water-mixing valve.
What information is needed to select this equipment?
State species, incoming weight and temperature range, upstream scalding condition, required rate, discharge height, water or energy supply and by-product collection. Agree product quality criteria under the actual input conditions.
Are these specifications an approved supply commitment?
No. These are source reference details. The quotation must identify the exact configuration, drawing revision, included documents and agreed acceptance criteria.
Related configurations and guidance
Reference specification and document status
Download HT-S307 reference specification and verification checklist
This reference is not an approved manufacturing drawing, inspection report or certificate. Request the configuration-specific documents before purchase.