SlaughterPro | HUATAOSearch

Sheep Carcass Chilling Hook

Sheep Carcass Chilling Hook. Compare product range, residence time and utility conditions; share your requirements for configuration review.

Sheep Carcass Chilling Hook — source product-family photograph; confirm the quoted configuration

Specification notes

Model statusProduct family; exact model not identified in the supplied section
MaterialSUS304 Stainless Steel
Hook MaterialØ10 mm Stainless Steel Rod
Hanging Capacity4 / 6 / 8 Sheep Carcasses
Data statusSource reference R1; configuration requires written confirmation

Use and process role

The Sheep Carcass Chilling Hook is an essential accessory used in sheep and goat slaughterhouses for suspending carcasses during the chilling, storage, and dispatch stages. Installed between the trolley pulley hook and the carcass, it enables multiple carcasses to be transported efficiently through overhead rail systems while maintaining adequate spacing for airflow.

Available in 4-hanger, 6-hanger, and 8-hanger configurations, the hook assembly helps maximize cold room capacity without compromising carcass cooling performance. Constructed entirely from food-grade stainless steel, it offers excellent corrosion resistance, high structural strength, and long service life in low-temperature and high-humidity environments.

Its modular design allows processors to select the appropriate hanger quantity according to slaughter capacity, rail spacing, and cold storage layout. The system is widely used in commercial sheep, lamb, and goat processing plants ranging from small regional abattoirs to fully automated export facilities.

Structure and working principle

After dressing and final inspection, each sheep carcass is suspended on a trolley pulley hook. The pulley hook is then connected to the multi-hanger chilling hook assembly.

The chilling hook carries four, six, or eight carcasses simultaneously while traveling along the overhead rail inside the chilling room. Proper spacing between carcasses allows cold air to circulate evenly around each carcass, accelerating temperature reduction and improving meat quality.

When chilling is completed, the same hook assembly transfers the carcasses to cutting, deboning, packaging, or dispatch areas without manual re-hanging, minimizing labor and handling damage.

Source-listed construction and features

Available in 4-hanger, 6-hanger, and 8-hanger versions

Designed for sheep, lamb, and goat carcasses

Manufactured from food-grade SUS304 stainless steel

Heavy-duty welded structure with excellent rigidity

Smooth polished surface for easy cleaning

Corrosion-resistant under chilled room conditions

Compatible with most overhead tube rail systems

Optimizes cold room storage capacity

Reduces manual handling during carcass transfer

Long service life with minimal maintenance

Applications and integration

The carcass chilling hook is widely used in modern sheep and goat slaughterhouses to transport carcasses through chilling tunnels, cold storage rooms, maturation chambers, and dispatch areas.

It is suitable for:

Commercial sheep slaughterhouses

Goat processing plants

Halal abattoirs

Meat export facilities

Cold storage systems

Automated overhead rail lines

Selection conditions and project fit

Provide rail or belt dimensions, working height, travel direction, carrier spacing, load range, speed and upstream/downstream connection drawings. A similar-looking carrier is not proof of fit.

Evidence, configuration and document status

The descriptions and tables below are source-listed reference information, not independently measured results. Confirm material grade, electrical supply, dimensions, duty, guards, controls and delivery scope in the approved quotation and drawing. No model-specific certificate or verified customer installation is established by this page. Request the document issuer, applicable model, scope and revision before relying on a compliance claim.

Source and version

Reference compilation R1, 2026-11-16. Supplied document: 3. 冷却 去骨分割设备.doc; section 3.1. Configuration rows retain source units. Where the source lists alternatives or several models, each row must be checked as a separate configuration; a capacity or dimension must not be transferred between models.

Installation and process interfaces

State incoming product condition, process residence time, line speed, working height, water connections, drain location and access for cleaning or component removal. Check the full installation envelope, not only catalogue dimensions.

Utilities, control and feedback requirements

Use only the power, water, heating or cooling values given for the matching source configuration. Confirm operating pressure/flow or temperature, control method and line signals. A reference machine does not establish a validated hygiene or cooling result.

Maintenance and part identification

Request the configuration-specific manual and part references for nozzles, seals, pumps, sensors, conveying elements and any heating/cooling components fitted. Agree quantities and replenishment needs against actual duty and delivery experience. This page does not prescribe maintenance intervals, repairs or a guaranteed stock position.

Configuration-specific document checklist

Before purchase, identify the complete model and suffix, configuration table and drawing revision. Request the applicable layout/interface drawing, specification, manual, parts list and agreed inspection or test records. Performance curves or certificates should be linked only when an applicable original exists; a reference summary is not a substitute.

Compare configurations for your project

For Sheep Carcass Chilling Hook, keep the complete identifier the proposed complete model and configuration attached to its own source configuration. Compare process duty, incoming animal or product range, target output, utilities, installation envelope and upstream/downstream interfaces under the same project conditions. A higher catalogue rate alone does not establish a better fit.

Start with this page's listed reference fields: Model status: Product family; exact model not identified in the supplied section; Material: SUS304 Stainless Steel; Hook Material: Ø10 mm Stainless Steel Rod; Hanging Capacity: 4 / 6 / 8 Sheep Carcasses. Confirm units, conditions and revision against the quoted configuration; do not transfer values to another model.

Compare alternative quotations only after each supplier identifies the complete model, configuration and matching documents. No universal suffix meaning or unsupported advantage over another model is asserted.

Purchasing review and enquiry preparation

Start with Sheep Carcass Chilling Hook and its specification/source notes. Download the linked reference summary, then request the original configuration-specific drawing and current technical documents. The summary is not an approved drawing, certificate or acceptance record.

Use the linked sheep & goat processing application and purchasing guidance to review process interfaces, selection conditions and the proposed supply boundary. Verify which manufacturer, supplier and installation responsibilities are included; a reference photo does not establish factory ownership, certification or a completed HUATAO installation.

Before enquiry, prepare animal species or incoming product, size/weight range, target throughput, operating shifts, destination, available utilities and a layout or interface drawing. Quote the proposed complete model and configuration and identify the missing documents or conditions you need checked. Use the enquiry on this page so the product and original source page are retained.

Source reference configuration 1
ItemSpecification
Product NameSheep Carcass Chilling Hook
Models4-Hanger / 6-Hanger / 8-Hanger
MaterialSUS304 Stainless Steel
Hook MaterialØ10 mm Stainless Steel Rod
Tie RodØ12 mm Stainless Steel (6 & 8 Hanger Models)
Hanging Capacity4 / 6 / 8 Sheep Carcasses
Standard Length1000–1200 mm (Customizable)
Hook SpacingApprox. 220 mm (8-Hanger Model)
Surface FinishPolished
InstallationConnected to Tube Rail Pulley Hook
Operating Temperature-30°C to +40°C
ApplicationCold Room / Chilling Rail System

Buyer FAQ

1. What is the difference between the 4, 6, and 8-hanger models?

The main difference is the number of carcasses that can be suspended simultaneously. Higher-capacity models improve cold room utilization and transportation efficiency.

4. Is it compatible with existing overhead rail systems?

It is compatible with most standard tube rail pulley hook systems used in sheep slaughterhouses.

6. What is the expected service life?

Under normal operating conditions and proper maintenance, the stainless steel structure provides many years of reliable service.

7. Does it require regular maintenance?

Routine cleaning and periodic inspection of welds and hook integrity are generally sufficient.

What information is needed to select this equipment?

Provide rail or belt dimensions, working height, travel direction, carrier spacing, load range, speed and upstream/downstream connection drawings. A similar-looking carrier is not proof of fit.

Are these specifications an approved supply commitment?

No. These are source reference details. The quotation must identify the exact configuration, drawing revision, included documents and agreed acceptance criteria.

Related configurations and guidance

Sheep & goat processing equipment categories Sheep & goat processing process application Check complete model identifiers and suffixes

Reference specification and document status

Download sheep-goat-3-1-sheep-carcass-chilling-hook reference specification and verification checklist

This reference is not an approved manufacturing drawing, inspection report or certificate. Request the configuration-specific documents before purchase.

Applications

Sheep & goat processing workflowExplore sheep & goat processing by process task, source equipment and project conditions.

Capabilities

Sheep & goat processing line planningExplore sheep & goat processing by process task, source equipment and project conditions.

Request specifications

Add company or technical details (optional)

Equipment under review: Sheep Carcass Chilling Hook (exact model to confirm)

Start with what you know. You can send drawings or photographs by email.

Continue your technical review