SlaughterPro | HUATAOSearch

Sheep Carcass Segmented Cut Saw | HT-S305

Sheep Carcass Segmented Cut Saw. Compare input range, required output and working interfaces; share your requirements for configuration review.

Sheep Carcass Segmented Cut Saw — source product-family photograph; confirm the quoted configuration

Specification notes

ModelHT-S305
Voltage380 V / 3 Phase / 50 Hz
Motor Power2.2 kW
Sliding Table Size900 × 850 mm
Machine Dimensions855 × 945 × 1800 mm
Construction Material304 Stainless Steel
Data statusSource reference R1; configuration requires written confirmation

Use and process role

Precision Portion Cutting for Chilled Sheep & Goat Carcasses

The Sheep Carcass Segmented Cut Saw is designed for the secondary cutting stage of sheep and goat processing. Installed after carcass chilling, this machine enables operators to divide whole or half carcasses into commercial cuts with high dimensional accuracy and minimal material loss.

Unlike carcass splitting saws used immediately after dressing, the segmented cut saw is specifically intended for portioning chilled carcasses into shoulders, racks, loins, legs, saddles, and other wholesale or retail cuts.

The machine features a rigid 304 stainless steel structure, a precision-guided sliding table with ball-bearing support, manual blade tension adjustment, and a removable product holder. These features ensure smooth product feeding, stable cutting performance, and easy sanitation in accordance with modern meat processing standards.

The standard HT-S305 model is equipped with a 2.2 kW motor, offers a maximum cutting width of 400 mm, a maximum cutting height of 410 mm, and a 900 × 850 mm sliding table, making it suitable for medium and large sheep processing facilities.

Typical users include:

Sheep slaughterhouses

Goat processing plants

Meat cutting workshops

Export meat processing factories

Deboning and portioning facilities

Working Principle (Processing Workflow)

After carcasses are chilled and graded, they are transferred to the cutting room where the operator positions the carcass or primal cut on the sliding table.

The workpiece is guided smoothly toward the continuously running band saw blade by means of the ball-bearing sliding table. The stable table movement and rigid frame help maintain straight cutting lines while minimizing vibration.

Once each section is cut, the portions are transferred to trimming, deboning, packaging, or vacuum packing stations.

This workflow improves cutting consistency, increases yield, and reduces operator fatigue compared with manual cutting methods.

Source-listed construction and features

Heavy-Duty Stainless Steel Construction

The complete machine frame is manufactured from 304 stainless steel, providing excellent corrosion resistance, hygienic performance, and long service life in meat processing environments.

Precision Sliding Table

A ball-bearing guided sliding table enables stable product movement and improves cutting precision while reducing operator effort.

Large Cutting Capacity

Suitable for processing:

Whole sheep carcasses

Half carcasses

Shoulders

Legs

Saddles

Loins

Racks

Maximum cutting size:

Width: 400 mm

Height: 410 mm

Manual Blade Tension Adjustment

The manual blade tension mechanism allows operators to maintain proper blade alignment, ensuring accurate cuts and extending blade life.

Easy Cleaning Design

The folding table structure and removable product holder simplify daily sanitation and maintenance, reducing downtime between production shifts.

Quiet & Stable Operation

The rigid housing and balanced drive system minimize vibration and operating noise, helping maintain cutting accuracy during continuous production.

Selection conditions and project fit

State incoming product size and temperature, target cut or separation, rate, output specification, interfaces, blade or tool arrangement and guarding requirements. Agree a representative-product trial and the acceptance criteria.

Evidence, configuration and document status

The descriptions and tables below are source-listed reference information, not independently measured results. Confirm material grade, electrical supply, dimensions, duty, guards, controls and delivery scope in the approved quotation and drawing. No model-specific certificate or verified customer installation is established by this page. Request the document issuer, applicable model, scope and revision before relying on a compliance claim.

Source and version

Reference compilation R1, 2026-11-16. Supplied document: 3. 冷却 去骨分割设备.doc; section 3.2. Configuration rows retain source units. Where the source lists alternatives or several models, each row must be checked as a separate configuration; a capacity or dimension must not be transferred between models.

Installation and process interfaces

Provide product size and condition, target cut or separation, feed/discharge direction, support height and space for tool replacement and maintenance. Confirm the proposed guards, operator access and connection to the receiving station.

Utilities, control and feedback requirements

Check the model-specific drive and electrical or fluid-power supply. Agree start/stop, upstream/downstream interlocks and feedback requirements where relevant. Do not infer a control protocol or tool capability from a family photograph.

Maintenance and part identification

Request the configuration-specific manual and part references for matched blades or tools, drive components, seals and position sensors where fitted. Agree quantities and replenishment needs against actual duty and delivery experience. This page does not prescribe maintenance intervals, repairs or a guaranteed stock position.

Configuration-specific document checklist

Before purchase, identify the complete model and suffix, configuration table and drawing revision. Request the applicable layout/interface drawing, specification, manual, parts list and agreed inspection or test records. Performance curves or certificates should be linked only when an applicable original exists; a reference summary is not a substitute.

Compare configurations for your project

For Sheep Carcass Segmented Cut Saw | HT-S305, keep the complete identifier HT-S305 attached to its own source configuration. Compare process duty, incoming animal or product range, target output, utilities, installation envelope and upstream/downstream interfaces under the same project conditions. A higher catalogue rate alone does not establish a better fit.

Start with this page's listed reference fields: Voltage: 380 V / 3 Phase / 50 Hz; Motor Power: 2.2 kW; Sliding Table Size: 900 × 850 mm; Machine Dimensions: 855 × 945 × 1800 mm; Construction Material: 304 Stainless Steel. Confirm units, conditions and revision against the quoted configuration; do not transfer values to another model.

Compare alternative quotations only after each supplier identifies the complete model, configuration and matching documents. No universal suffix meaning or unsupported advantage over another model is asserted.

Purchasing review and enquiry preparation

Start with Sheep Carcass Segmented Cut Saw | HT-S305 and its specification/source notes. Download the linked reference summary, then request the original configuration-specific drawing and current technical documents. The summary is not an approved drawing, certificate or acceptance record.

Use the linked sheep & goat processing application and purchasing guidance to review process interfaces, selection conditions and the proposed supply boundary. Verify which manufacturer, supplier and installation responsibilities are included; a reference photo does not establish factory ownership, certification or a completed HUATAO installation.

Before enquiry, prepare animal species or incoming product, size/weight range, target throughput, operating shifts, destination, available utilities and a layout or interface drawing. Quote HT-S305 and identify the missing documents or conditions you need checked. Use the enquiry on this page so the product and original source page are retained.

Source reference configuration 1
ItemSpecification
Product NameSheep Carcass Segmented Cut Saw
ModelHT-S305
ApplicationSheep & Goat Carcass Portioning
Voltage380 V / 3 Phase / 50 Hz
Motor Power2.2 kW
Maximum Cutting Width400 mm
Maximum Cutting Height410 mm
Sliding Table Size900 × 850 mm
Machine Dimensions855 × 945 × 1800 mm
Construction Material304 Stainless Steel
Blade TensionManual Adjustment
Table TypeBall-Bearing Sliding Table
Cleaning DesignFolding Table & Removable Product Holder

Buyer FAQ

What is the difference between a carcass splitting saw and a segmented cut saw?

carcass splitting saw divides a dressed carcass into halves immediately after slaughter, while a segmented cut saw portions chilled carcasses into commercial meat cuts such as legs, loins, racks, and shoulders.

How should the saw blade be maintained?

Inspect blade tension daily, clean the blade after each production shift, and replace worn blades promptly to maintain cutting accuracy and food safety.

How often should the machine be cleaned?

The machine should be thoroughly cleaned and sanitized after every production shift. The removable holder and folding table design make routine cleaning faster and more effective.

What safety practices are recommended?

Operators should wear cut-resistant gloves, verify proper blade tension before operation, keep guards correctly installed, and stop the machine before cleaning or blade replacement.

What information is needed to select this equipment?

State incoming product size and temperature, target cut or separation, rate, output specification, interfaces, blade or tool arrangement and guarding requirements. Agree a representative-product trial and the acceptance criteria.

Are these specifications an approved supply commitment?

No. These are source reference details. The quotation must identify the exact configuration, drawing revision, included documents and agreed acceptance criteria.

Related configurations and guidance

Sheep & goat processing equipment categories Sheep & goat processing process application Check complete model identifiers and suffixes

Reference specification and document status

Download HT-S305 reference specification and verification checklist

This reference is not an approved manufacturing drawing, inspection report or certificate. Request the configuration-specific documents before purchase.

Applications

Sheep & goat processing workflowExplore sheep & goat processing by process task, source equipment and project conditions.

Capabilities

Sheep & goat processing line planningExplore sheep & goat processing by process task, source equipment and project conditions.

Request specifications

Add company or technical details (optional)

Equipment under review: HT-S305

Start with what you know. You can send drawings or photographs by email.

Continue your technical review